English
FUSION180
- 180W Beam, Wash and Spot moving head
Page 15
9 - Dimensions
Upon activation, your projector will first initialize. The message « Error channel is XX » may appear on the display as the results
or problems occuring with one or several channels.
Your device will then generate an order or re-initialization and all motors will go back to their initial position.
If the message keeps appearing after 3 re-initialization, this may means there are more than 3 errors, in which case the DMX
channels cannot operate properly. If there are less than 3 mistakes, the problematic channels only will be deactivated.
Error channel is 01 : PAN movement error (yoke).
This message may appear upon initialization if the PAN magnetic sensor is defective.
Error channel is 03: TILT movement error (head).
This message may appear upon initialization if the TILT magnetic sensor is defective.
Errors may have diverse origins. Sensors allow to calibrate the position of motors.
Either the magnetic sensors are defective, or misplaced.
The problem might also come from from a defective motor or the improper electronic control of said motor.
Please note the error name displayed on the screen and contact your retailer to engage in a maintenance procedure.
8 - Error messages
105
130
287.5
159.5
376
278.5
89
232.5
393.5
583
414
368.5
