English
FUSION180
- 180W Beam, Wash and Spot moving head
Page 8
Sub-menus
Sub-sub-menus
Values
Description
Status Settings
Mov Speed
Speed
1
~ 4
Allows you to configure the auto movements speed
AUTO : 1 = fast ; 4 = slower
Mic Sens
0 ~ 99%
Adjusts the microphone sensitivity for music-sensitive modes
Stand By
OFF
01m ~99m
(05m)
Configures the amount of time without DMX signal before entering
stand-by mode.
Upon reception of another signal, your projector will re-initialize
before being operational.
Default value is 15 minutes.
Fixture ID
ServicePIN
Password to access ServicePIN : 050
RDM PID
ID code for this projector in order to identify it for DMX remote
settings.
The RDM protocols uses information packets transmitted via DMX.
The PID RDM depends on the RDM compatible controller used.
Fans. Set
Head Fan
Allows you to configure the ventilation of the head of your
projector.
-
Auto
: The projector controls its own temperature (default
value).
-High : Forces maximum ventilation.
-Low : Slower ventilation. Especially useful when the room
requires silence.
Base Fan
Allows you to adjust the ventilation of the body of your projector.
-
90%
/ 75% / 50%
LCD. Set
ShutoffTime
02 ~60m
(05m)
Sets the amount of time without activity before the menu enters
stand-by mode.
Display Rev
ON/
OFF
Rotates the display by 180°
Key Lock
ON/
OFF
Allows you to lock buttons after a 15-second period of inactivity.
Buttons can be unlocked by pressing MENU for 3 seconds.
Disp Flash
ON/
OFF
Activates display flashes in case of DMX signal interruption.
Temp. C/F
Celsius
/ Fahrenheit
Sélection de l'unité d'affichage de la température.
Init. Status
Service PIN = XXX
Auto Pro = XXX
PAN = XXX
....etc
Allows you to set the position of each function upon initialization
of your projector.
DFSE
ON/
OFF
Resets back to factory settings.
NOTE: All user programs will be erased.
6.3 PERSONALITY menu
