Contest Evora SP60, Руководство пользователя

Страница: 5 / 20

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms
Page 5
English
9 - DMX output via 3-pin XLR
10 - DMX input via 3-pin XLR
11 - DMX output via 5-pin XLR
12 - DMX input via 5-pin XLR
13 - Power switch
14 - Fuse
Fuse : 3.15A - 250V ; 5 x 20 mm
15 - Power input
1 : Hook supports
2 : Hook
3 : Safety cable
(The current legislation requires a double holding system for any device used in public places. This
system must bear at lost 10 time the weight of the device. This means the Evora-180SP safety wire must
be able to bear approximately 90 kg).
4 : Quick-Lock wing nuts
The Evora-SP60 moving head is supplied
with two Quick-Lock fastening systems.
The example above indicates how to
install the Omega holders.
1 - Attach Omega holders or hook
clamps to the Quick-Lock systems.
2 - Position your Omega - Quick-Lock
systems on top of the drilled holes
located below the Evora-180SP.
3 - Rotate the Quick-Lock wing nuts a
quarter turn.
CAUTION!
Please make sure to
properly tighten the
fixation system.
Using a safety cable
is mandatory.
5 - Installing Quick-Lock fastening systems