CTLTAPE -
4-channel DMX wall-mounted controller
Page 5
English
Your CTLTAPE features two distinct modes which can be accessed by two-button combinations:
b - RGB1
mode
: Standard mode, there is nothing to configure. In this mode, there are two distinct
functions depending on the position of the Fade/Color button. Please find below the different functions
available.
This mode allows automatic colour changes.
Position the Fade/Color button onto Fade and adjust the
colour sequencing speed via the Speed/Dimmer button.
Allows precise colour selection.
Position the Fade/Color button onto the desired colour
(Orange on the drawing opposite) and adjust its intensity via
the Speed/Dimmer button.
Allows you to select a precise colour.
Position the Fade/Color button onto the colour of your
choice (Green on the drawing opposite) and adjust its
intensity via the Speed/dimmer button, from 0 to 100%.
The «
Sound
» position activates the POWTAPE music-sen-
sitive mode.
The «
Strobe
» position activates the strobe mode for the
selected colour, from slow to fast.
Identical to the function described in paragraph
a-1
.
2-2 : Modes
a-1 : Fade function
a-2 : Color Function
b-1 : Color, Dimmer, Sound and Strobe function
b-2 : Fade function
b - RGB2 mode
: Press the Stand-by and M1 buttons simultaneously until the Stand-by LED flashes briefly.
In this mode, the Fade/Color button either selects the Fade (colour sequencing) or a precise colour, while
the Speed/dimmer button allows you to access different functions as described below.
