UM-15094500-AA0
Page 4
1.1 Features and Benefits
•
Stand-alone thermostat algorithm or fully BACnet network-controllable
•
BTL listed with B-ASC device profile for integration into BACnet networks
•
24VAC (+/-10%) power input
•
BACnet communication - BACnet/IP over Wi-Fi and can be integrated into any
802.11 b/g/n Wi-Fi network
•
Suitable for single or dual compressor heat pump control applications with manual
or automatic changeover
•
Adjustable algorithm applied to multiple stage control (2 cooling stages- 3 heating
stages)
•
Effective run time accumulation for energy consumption metering
•
Configurable control parameters such as deadband, proportional gain, integral
rate and cycle time
•
Adjustable minimum/maximum set point ranges
•
Three options for temperature sensing:
o
Built-in temperature sensor, or
o
Remote sensor (RS) input for wiring in a remote temperature sensor
(NTC 3kΩ), or
o
BACnet network temperature input
•
Occupancy status can be switched (1) locally by the user, (2) by using a separate
occupancy sensor, or (3) by using BACnet network command.
•
Separate adjustable occupied and unoccupied set points for heating and cooling
mode
•
Fan can be set to run continuously or automatically
•
Non-volatile memory retains user settings during power outage
•
Thermostat buttons are lockable to prevent tampering
•
°C or °F display
•
Energy Savings Input for local occupancy control
•
Control outputs disabled during “OFF” state for safety