17
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service personnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Don’t let food dry on the jar
assembly as this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to P position for a few seconds.
And then empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit, To detach the blade
assembly by turning it clockwise from the jar base bottom , and remove the seal ring 2 and
blade assembly (see fig.8). In addition, detach the jar cover seal ring 1 from the jar cover.
5. Rinse the measure cup, lid, seal ring 1, jar, seal ring 2 and blade assembly by hands or in a
dishwasher and then dry. They are dishwasher safe components, but the temperature setting
shall not exceed 70℃.
6. Brush the blade clean using warm soapy water, then rinse thoroughly under the tap. Don’t
touch the sharp blades, handle carefully. Leave to dry upside down away from children.
7. Wipe the motor unit with a damp cloth and dry thoroughly. Remove the stubborn spots by
rubbing with non-abrasive cleaner. If liquids spill into the motor unit; first unplug the unit,
then wipe with a damp cloth and dry thoroughly.
CAUSION
1) Do not immerse the motor unit in liquid to prevent the risk of electric shock.
2) Do not use rough scouring pads or cleansers on parts or finish.
