15
GRINDER OPERATION FOR COFFEE BEAN
1. Lay the motor unit on the flat horizontal surface and make sure it is
unplugged.
2. Fill the grinding bowl with proper coffee bean, then assemble the
grinding blade assembly and grinding bowl together. Please see
Fig.3
NOTE: The quantity of coffee bean the grinding bowl allows to
grind is Max 60g.
3. Place the grinder attachment on the motor unit, Turn the bowl
clockwise until a click will be heard when locked into position properly.
Please see Fig. 4
NOTE: There is a safety interlock device at the bottom of bowl,
If the bowl is not assembled in place, the chopper will not operate.
4. Ensure the
Speed Selector
to
“
0
”
Position, then plug into power
outlet.
5. Select the desired speed setting, the appliance will start grinding. During grinding, you can
press down the
Pulse button
without releasing it if want to accelerate the process of
grinding.
6. Turn the
Speed Selector
to
“
0
”
Position once the coffee has been ground to your desired
result.
7. Disconnect from power supply once finished. Disassemble the grinder
attachment from the unit, keep the grinding bowl downward and turn it
anticlockwise (see fig.5), then empty the bowl and serve.
8. Do not run the appliance for more than 30s per time, and only
wait until the unit is cooled to room temperature before performing next
operation cycle.
GRINDER OPERATION FOR BEEF
1. Lay the motor unit on the flat horizontal surface and make sure it is unplugged.
2. Fill the grinding bowl with proper beef, then assemble the grinding blade assembly and
grinding bowl together. Please see Fig.3
NOTE: The quantity of beef the grinding bowl allows to grind is Max 60g, Beef block
dimension do not be more than 20mm*20mm*20mm.
3. Place the grinder attachment on the motor unit, Turn the bowl clockwise until a click will be
Fig.4
Fig.5
Fig.3
