11
IMPORTANT SAFEGUARDS
When using this electrical appliance, basic safety precautions should always be followed,
including the following:
1. Read all instructions.
2. Before using check that the voltage indicated on the product corresponds with the voltage
of your electrical outlet.
3. Do not let cord hang on hot surface or over edge of table or counter.
4. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunction or has been damaged in any manner. Return the appliance to the nearest
authorized service facility for examination, repair or adjustment.
5. If the supply cord is damaged
，
it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
6. Close supervision is necessary when any appliance is used by or near children.
7. Avoid contacting the moving parts.
8. Keep hands and utensils out of container while blending to reduce the risk of severe injury
to persons or damage to the blender. A scraper may be used but must be used only when
the blender is not running.
9. The use of attachments not recommended or sold by manufacturer may cause fire, electric
shock or injury.
10. Unplug from outlet when not in use, before putting on or taking off parts, and before
cleaning. To disconnect, turn any control to “off”, then remove plug from wall outlet by
grasping the plug, not the cord.
11. To reduce the risk of injury, never place blade assembly on motor unit without the jar
properly attached.
12. Do not leave the machine on unattended.
13. When removing the blender from the motor unit, wait until the blades have completely
stopped.
14. Always operate blender with cover in place.
15. Always use the appliance on a secure, dry level surface.
16. Never place this appliance on or near a hot gas or an electric burner or where it could touch
a heated appliance.
17. Do not use outdoors.
18. Do not use appliance for other than its intended use.
19. Be care of potential injury from misuse.
20. Care shall be taken when handling the sharp cutting blades, emptying the bowl and during
cleaning.
21. Be careful if hot liquid is poured into the food processor or blender as it can be ejected out
of the appliance due to a sudden steaming.
22. Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling or cleaning.
23. Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
