- 9 -
7. Code Number Read-Back
To identify the 3-digit setup codes stored under the Point and Press
®
programming method, follow these steps:
To identify the TV setup code…
1. Press [TV], then [SEL / OK] together until the [TV] button illuminates.
2. Press [INFO]. The [TV] button will “blink back” the code numbers, with a 1-second interval between each
digit of the code.
Example: For code “035”, the remote will blink 10 times, then 3 times, then 5 times.
To identify the 3-digit VIDEO code, press [VIDEO], then [SEL / OK] in step 1, then press [INFO].
To identify the 3-digit AUDIO code, press [AUDIO], then [SEL / OK] in step 1, then press [INFO].
8. Volume Control
When you first program your remote, volume / mute are controlled through your TV. The volume control options in
each mode of the remote are:
S-A TV
(default),
Cable
or
AUDIO.
TV
TV
(default),
Cable
or
AUDIO.
VIDEO
TV (default), Cable or AUDIO.
AUDIO AUDIO
(default), Cable or TV.
MOT
TV (default) or Cable or AUDIO.
To control volume / mute through your Cable set-top terminal in the remote’s Cable mode…
1. Press [S-A] (or [MOT]), then [SEL / OK] together until the [S-A] (or [MOT]) button illuminates.
2. Press [VOL +], then [S-A] (or [MOT]) for Cable volume. The [S-A] (or [MOT]) button will blink 3-times and go
out.
To return volume control to your TV, repeat step 1, then press [VOL +], then [TV] in step 2.
9. Input / Video Source
This button changes the input source of your electronic devices. In the remote's S-A & MOT modes, this operates
a Cable function. In the remote's TV mode, this button changes the Input Source (Input 1, Input 2...) on your TV. In
the remote's VCR mode, this button changes the TV / VCR Input on your VCR.
You can program this button so that in the remote's S-A or MOT mode, [INPUT / VIDEO SOURCE] will operate the
Input function on your TV or VCR, eliminating the need to change modes on the remote.
To program [INPUT / VIDEO SOURCE] to operate your TV Input function in the remotes cable mode...
1. Press [INPUT / VIDEO SOURCE], then [SEL / OK] together until the [S-A] button illuminates.
2. Press [TV]. The [S-A] button will blink 3-times and go out.
Note: You can also press [VIDEO] in step 2 above to operate the TV / VCR function on your VCR. Or press [
S-A
]
to return to the normal CBL Video Source function.
