1. Before Using the Product
CONTEC CO., LTD.
IPC-CDD-02
3
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these labels
to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Handling Precautions
CAUTION
-
Do not use or store the product in a location exposed to extremely high or low temperature or
susceptible to rapid temperature changes.
Example:
- Exposure to direct sun
- In the vicinity of a heat source
-
Do not use the product in extremely humid or dusty locations. It is extremely dangerous to use the
product with its interior penetrated by water or any other fluid or conductive dust. If the product
must be used in such an environment, install it on a dust-proof control panel, for example.
-
Avoid using or storing the device in locations subject to shock or vibration.
-
Do not use the product in the vicinity of devices that generate strong magnetic force or noise. Such
devices will cause this device to malfunction.
-
Do not use or store the product in the presence of chemicals.
-
To clean the Drive Unit, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing
or discoloration of the paint.
-
CONTEC reserves the right to refuse to service a product modified by the user.
-
In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power
cord immediately and contact the sales representative you purchased the product from or the
CONTEC Information Center.
-
Use an AC cable that is compatible with both the rated supply voltage and the receptacle. (The cable
provided with the product is for 125VAC.)
-
Component Life:
1. Fan---
Longevity of the fan is approx. 20000 hours when it continues operating at 25
degrees. But the temperature was fallen by used one (high).
* Replacement of expendables is handled as a repair (there will be a charge).
