2. About Hardware
CONTEC CO., LTD.
IPC-CDD-02
5
2.
About Hardware
Specifications
Table 2.1. Function Specifications
Item
Specification
Bus interface
IDE
Cable
Dedicated 40-pin cable, 40cm in length
Formats supportted
DVD-ROM(single layer , dual layer )
DVD-R(3.95Gbyte, 4.7Gbyte)
DVD+R(Version 1.0)
DVD-RW(Rev 1.0, 1.1) *1
DVD+RW *1
DVD-RAM(2.6Gbyte/panel, 4.7Gbyte/panel) *1
CD-ROM Mode1&Mode2, CD-ROM XA
CD-I, Photo-CD, CD-Extra, CD-TEXT, CD-DA, VideoCD
Disk media supported *2
DVD-ROM, DVD-R, DVD+R, DVD-RW, DVD+RW,
DVD-RAM, CD-ROM, CD-R, CD-RW
Maximum data transfer rate
33.3MB/sec(Ultra DMA Mode2)
Maximum read speeds
DVD-ROM: 16X speed (single layer), 12X speed (dual layer)
DVD-R:6X speed
DVD+R:6X speed
DVD-RW:2.5X speed
DVD+RW:2.5X speed
DVD-RAM:2X speed
CD-ROM:48X speed
CD-R:40X speed
CD-RW:40X speed
Average access time
DVD-ROM:125ms
CD-ROM:100ms
Data buffer size
256KB
Master/Slave switching
Selector switch
Cooling device
Rear-panel fan(60mm emission)
External dimensions (mm)
207(W) x 285(D) x 68(H) (Excluding protrusions)
Power supply
90 to 264VAC(47 to 63Hz)continuous input
Power consumption
40VA(Max.)
Weight
Approx. 2.8kg
*1 The drive unit can read only discs formatted in UDF 1.02 or 1.5; it cannot read those formatted in FAT or FAT32.
*2 The drive unit can only read but cannot write to DVD-RAM.
