IPC-ACAP12-02, IPC-ACAP12-03, IPC-ACAP12-04
User’s Guide
Copyright 2008 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO.,LTD.
February 2013 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ A-51-617
(LYJV415)
Chinese http://www.contec.com.cn/
02152013_rev5
[08222008]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Handling Precautions
WARNING
Indicates dos and don'ts that are assumed to result in possible
death or serious injury if they are inappropriately handled
ignoring this icon.
-
Do not use the product in locations exposed to a flammable
or corrosive gas. It may cause explosion, fire, electrical
shock, or malfunction.
-
If you sense abnormality (smoke, odor, or noise),
immediately unplug the power cord from the wall outlet and
contact the CONTEC sales representative or sales office.
-
To avoid electrocution do not use the product with a wet
hand.
-
Be sure to connect the product to the stipulated power
supply voltage. Connecting to a different voltage might
cause a fire or electrical shock.
-
Do not use the product with the other power device. It
may cause fire or malfunction.
-
When the cable or main body is damaged, stop using and
repair it immediately. Using it as it is may cause fire,
electrical shock or malfunction.
-
Never disassemble or modify the product or replace its parts
in order to prevent electrical shock, fire, or malfunction.
CONTEC reserves the right to refuse servicing the product
modified by the user. When any part of the product needs to
be replaced at the expiration of its life or due to breakdown,
please contact the CONTEC sales representative or sales
office.
-
Use the product with the specified models by the CONTEC.
Not doing so may cause fire or malfunction.
-
Use the product in the specified operating condition
(temperature and humidity)
-
Please make sure to observe the restrictions in
using it with a panel computer.
CAUTION
Indicates dos and don'ts that are assumed to result in possible
injury or property damage if they are inappropriately handled
ignoring this icon.
-
Do not use or store the product in a location exposed to
extremely high or low temperature or susceptible to a rapid
temperature change. Example:
- Exposure to direct sun - In the vicinity of
a heat source
-
When unplugging the cable, hold the plug. Holding and
pulling the cable itself can cause a failure such as
discontinuity.
-
To clean the product wipe it gently with soft cloth damp
with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene
and thinner, to prevent peeling or discoloration of the paint.
-
When transporting the product, provide adequate measures
to protect it from vibration or shock.
-
No part of this document may be copied or reproduced in
any form by any means without prior written consent of
CONTEC CO., LTD.
-
The information in this document is subject to change
without notice.
-
All relevant issues have been considered in the preparation
of this document. Should you notice an omission or any
questionable item in this document, please feel free to
notify CONTEC CO., LTD.
-
Regardless of the foregoing statement, CONTEC assumes
no responsibility for any errors that may appear in this
document or for results obtained by the user as a result of
using this product.
