Contec FXE3000 Series, Руководство пользователя

Страница: 36 / 111

4. Setup and Status Display
FXE3000 Series 29
Table 4.2. Description of WLAN Infrastructure Mode
Item Description
Standard Infrastructure
A configuration where a standard infrastructure access point is the core and stations (wireless
networking cards, etc.) are located under it. (Infrastructure)
With standard infrastructure, the device can use its own wireless networking feature.
Compatible
Infrastructure
A configuration where a compatible infrastructure access point is the core and stations
(wireless networking cards, etc.) are located under it. (Infrastructure)
Select this mode when connecting to access points created by other companies. However, the
device cannot use its own wireless networking feature.
Advanced
Infrastructure A mixed mode of both modes where the device can use an advanced infrastructure access point
as standard infrastructure while also using compatible infrastructure at the same time.
TX Power
Select the transmit power.
You can select either "MAX, "50%", "25%", or "12%".
Default setting : MAX
Antenna Selection
This setting can only be configured when the wireless networking standard is "IEEE802.11a",
"IEEE802.11b", or "IEEE802.11g". Select the antenna mode as "Auto" or "Fixed (Antenna:1)". This
setting is not normally required. When using the device with only one external antenna installed, select
the antenna mode as "Fixed (Antenna:1)".
Default setting
:
Auto