Contec CPS-MG341G-ADSC1-930, Справочное руководство

Страница: 77 / 93

—
Appendix
—
CPS-MG341G-ADSC1-930 Reference Manual (Hardware)
— 77 —
Item Description
Connector 9-pin D-SUB connector (Male)
LED Transmission (Yellow), Reception (Yellow)
Digital input
Counter input
Input type Opto-coupler Isolation Input (Compatible with current sink
output and current source output) (negative logic) *2
Isolation/Resistance Bus Isolation /500VDC, Inter Channel Isolation /1000V
External circuit power
supply
12 - 24 VDC (±10%)
Built-in power supply 12VDC (compatible with current sink output) *3
Input Resistance 5.6k Ω
Input ON current 1.6mA or more
Input OFF current 0.16mA or less
Response time Within 200μ sec *4
Interrupt (Digital Input) 4 interrupt input signals are arranged into a single output of
interrupt signal. An interrupt is generated at the falling edge
(HIGH-to-LOW transition) or rising edge (LOW-to-HIGH
transition). (setting can be done by software)
The number of channels 4 (It is possible to allocate 2channels to counter input)
Count Type Up count
Max. count FFFFFFH (binary data)
Counter response speed 1kHz (Max.), Duty : 50% (Max.)
Interrupt (Counter input) One interrupt caused upon channel count match
Timer None
LED DI0 - DI3 (Yellow)
Surge protection element
each signal to B_COM
Interactive TVS diode
Stand off voltage : ±30V, Peak pulse power : 400W(1msec)
Digital output Output type Semiconductor relay output
Isolation Semiconductor relay isolation/1000V
Maximum Output Voltage /
Current
26.4VAC/VDC/100mA
Response time Within 2msec
ON resistance 8Ω or less (at 25
℃
)
OFF leakage current 4μ A or less (at 25
℃
)
The number of channels 2
LED DO0 - DO1 (Yellow)
Surge protection element
+ to -
Interactive TVS diode
Stand off voltage : ±30V, Peak pulse power : 400W(1msec)
Digital input /
Counter input /
Digital output
Connector 2-piece 3.5mm pitch 10-pin terminal
(DI_ACOM, DI0, DI1, DI2, DI3, DI_BCOM, DO0+,
DO0-, DO1+, DO1-)
Applicable wire AWG28 - 16
Analog input Input type Current Input
Input range 0 - 20mA