Contec CONPROSYS nano CPSN-MCB271-S1-041 Скачать руководство пользователя страница 6

Страница: 6 / 47

1 Before Using the Product

CPSN-MCB271-S1-041 Reference Manual (Hardware)

Before Using the Product

This chapter provides necessary information before using the product.

About the Unit

This product is a remote I/O model CPU unit that has RS-232C and LAN interfaces in addition to four

expansion slots. If necessary, you can freely combine this product with CONPROSYS nano series I/O

modules.

In addition, this product can be controlled from a PC running Windows or Linux and supports Modbus

TCP Slave and Modbus RTU Slave.

Hardware Features

I/O module expansion

With this product, you can freely add I/O modules to match the necessary functions from among the

varied collection of CONPROSYS nano series I/O modules.

Max. 921,600bps RS-232C Serial Communication

The Product has one RS-232C-standard serial port. Baud rates from 110 to 921,600 bps can be set.

Compact Design

Compact design, 110 (W) × 74.8 (D) × 95 (H) mm, features flexibility in installation.

Easy installation and removal of I/O modules

Expansion modules can be installed and removed without any tools.

Adaptable to a wide range of temperature between -20 and +60°C

The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the

various environments.

Installation easy with a two-piece terminal on DIN or with screws

Regarding the power connector, the terminal connector can be removed without a screwdriver. Even

when a malfunction occurs, this product can be replaced in a short length of time. Furthermore, as the

product is mounted on the DIN rail, removing and replacing are easy as well. This product can also be

installed with screws, so it supports a wide range of installation situations.

Equipped with the LED for an operation check

The product has the LED for an operation check, which helps you visually confirm the communication
status of each interface.

No electrolytic capacitor

The product has the LED for an operation check, which helps you visually confirm the communication

status of each interface.

Содержание CONPROSYS nano CPSN-MCB271-S1-041
















































Результаты поиска

Содержание CONPROSYS nano CPSN-MCB271-S1-041

Отзывы:

Похожие инструкции для CONPROSYS nano CPSN-MCB271-S1-041

Бренды по названию

Популярные бренды

Contec CONPROSYS nano CPSN-MCB271-S1-041, Справочное руководство

Результаты поиска

Содержание CONPROSYS nano CPSN-MCB271-S1-041

Отзывы:

Похожие инструкции для CONPROSYS nano CPSN-MCB271-S1-041

Бренды по названию

Популярные бренды