Contec CONPROSYS nano CPSN-MCB271-S1-041 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 47

background image

2 Setup

CPSN-MCB271-S1-041 Reference Manual (Hardware)

17

Horizontal installation

Figure 2.12. Installation orientation (Horizontal)

Make sure to gain proper space between the product and devices that generate heat or exhaust air so that

the ambient temperature stays in the range specified in the environment requirement.

Also, the temperature range in the environment requirements varies depending on the
installation orientation, so check the operating temperature range in "Chapter 4 System
Reference".

Recommended installation angle

The recommended installation angle for this product is 0°. The temperature specifications of the product

vary between the case when the installation angle is 90° to the left/right and the case when a plane
installation is used, so check the operating temperature range in "Chapter 4 System Reference".

Ambient temperature

The ambient temperature is decided from the multiple measurement points which are a 50mm-distance

from the case. During the operation, adjust the air current to make certain that the temperatures

measured in the points stay within the specified temperature.

- The product is an open-type device (a device designed to be housed inside other equipment) and

must always be mounted inside a mechanical enclosure having enough strength.

- Note that although the ambient temperature is within the specified range, an operational failure may

occur if there is other device generating high heat nearby; the radiation will influence the product to

increase its temperature.

- Do not install the product into the fully-sealed space except the case in which the internal

temperature is adjustable by equipment such as an air conditioner. Long-term usage might increase

the temperature and lead to a malfunction or other troubles.

- When using the product in a high temperature environment, its life time will be shorten. Perform

the forced air cooling to counteract.

CAUTION

«
...
20
21
22
23
24
...
»

Содержание CONPROSYS nano CPSN-MCB271-S1-041
















































Отзывы:

Нет отзывов

Похожие инструкции для CONPROSYS nano CPSN-MCB271-S1-041

Бренд: Datasat Страницы: 32

ARM Cortex-A9 MPCore

Бренд: Dave Embedded Systems Страницы: 67

Бренд: Hama Страницы: 4

Бренд: Yamaha Страницы: 24

Бренд: Yamaha Страницы: 5

F-ZTAT H8/3048 Series

Бренд: Renesas Страницы: 34

Бренд: Fostex Страницы: 20

Converter Board R0E5212BACFG00

Бренд: Renesas Страницы: 6

Бренд: ICP DAS USA Страницы: 8

Бренд: Penguin Edge Страницы: 2

Vortex86SX VSX-6100

Бренд: ICOP Technology Страницы: 50

Бренд: Rainbow Страницы: 2

Бренд: Intercoax Страницы: 2

SOUL CALIBUR II

Бренд: NAMCO Страницы: 26

Kontron SMARC-sXEL

Бренд: S&T Страницы: 108

Бренд: Hama Страницы: 25

Бренд: ivideon Страницы: 11

Бренд: Renesas Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды