Contec CNT16-8FITGY Скачать руководство пользователя страница 6

Страница: 6 / 66

1. Before Using the Product

CNT16-8(FIT)GY, CNT16-8L(FIT)GY

Before Using the Product

This chapter provides information you should know before using the product.

About the

Module

This product is an expansion module (device module) that up-counts pulse signals input from an external

device. The product is used in combination with the I/O controller module < CPU-CAxx(FIT)GY > (*1)

or microcontroller unit < CPU-SBxx(FIT)GY > (*1) in the F&eIT Series.

Each < CNT16-8(FIT)GY > module can count a maximum of eight pulse signals. The pulse signals are

input via opto-couplers. The external power supply can be in the range 12 - 24 VDC.

The < CNT16-8L(FIT)GY > has the same count function as the < CNT16-8(FIT)GY > but operates on a

5 VDC external power supply.

Please read this manual carefully to create application programs and configure the system, such as

setting the switches and connecting it to external devices.

*1 The "x" in a model code represents a single digit (or no digit) indicating different products. (The

same convention applies below).

Features

Performs a 16-bit up-count for eight channels.

Isolated from each other by an opto-coupler, offering good noise immunity.

A digital filter is included to prevent miscounting due to chattering on the input pulses.

A rotary switch allows you to set device IDs to help you keep track of device numbers.

Like other F&eIT series products, the module has a 35mm DIN rail mounting mechanism as

standard. A connection to a controller module can be effected on a lateral, stack basis in a unique

configuration, which permits a simple, smart system configuration without the need for a backplane

board.

Содержание CNT16-8FITGY



































































Результаты поиска

Содержание CNT16-8FITGY

Отзывы:

Contec CNT16-8FITGY, Руководство пользователя, Страница: 6 / 66

Результаты поиска

Содержание CNT16-8FITGY

Отзывы: