Ver.1.04
.1.00er.1
AO-1604L-LPE
2
Item
Specification
Analog output
Isolated specification
Non-isolated
Number of output channels
4ch
Output range
Bipolar
±
10V
Absolute max. output voltage
±
3mA
Output impedance
1
Ω
or less
Resolution
16bit
Non-Linearity error *1
±
5LSB
Conversion speed
10
µ
sec [100KSPS]*2
Buffer memory
1k Word
Conversion start trigger
Software / external trigger
Conversion stop trigger
Number of sampling times / external trigger/software
External start signal
LVTTL level (Rising or falling edge can be selected
by software)
Digital filter (1
µ
sec can be selected by software)
External stop signal
LVTTL level (Rising or falling edge can be selected
by software)
Digital filter (1
µ
sec can be selected by software)
External clock signal
LVTTL level (Rising or falling edge can be selected
by software)
Digital I/O
Number of input channels
Non-isolated input 4ch (TTL level positive logic)
Number of output
channels
Non-isolated output 4ch (TTL level positive logic)
Counter
Number of channels
1ch
Counting system
Up count
Max. count
FFFFFFFFh (Binary data,32bit)
Number of external inputs
2 LVTTL level (Gate/Up)/ch
Gate (High level), Up (Rising edge)
Number of external outputs
1 LVTTL level, Count match output (positive logic,
pulse output)
Response frequency
10MHz (Max.)
Common section
I/O address
64 ports
Interruption level
Errors and various factors, One interrupt request line
as INTA
Used Connector
10250-52A2JL[3M] or equivalent to it
Power consumption
3.3VDC 400mA
12VDC 250mA
Operating condition
0 - 50
°
C, 10 - 90%RH (No condensation)
Bus specification
PCI Express Base Specification Rev. 1.0a x1
External dimension (mm)
121.69 (L) x 67.90 (H)
Weight
60g
Certification
RoHS,VCCI
*1: The non-linearity error means an error of approximately 0.1% occurs over the maximum
range at 0
°
C and 50
°
C ambient temperature.
*2: SPS = Samplings Per Second. The number of data that can be converted in one second
is shown.
Board Dimensions
[mm]
121.69(L)
6
7
.9
0
(H)
The standard outside
dimension(L) is the distance
from the end of the board
to the outer surface of
the slot cover.
Windows version of analog I/O driver API-AIO(WDM)
[Stored on the bundled Disk driver library API-PAC(W32)]
The API-AIO(WDM) is the Windows version driver library
software that provides products in the form of Win32 API
functions (DLL). Various sample programs such as Visual Basic
and Visual C++, etc and diagnostic program *1useful for
checking operation is provided.
For more details on the supported OS, applicable language and
new information, please visit the CONTEC’s Web site.
Linux version of analog I/O driver API-AIO(LNX)
[Stored on the bundled Disk driver library API-PAC(W32)]
The API-AIO(LNX) is the Linux version driver software which
provides device drivers (modules) by shared library and kernel
version. Various sample programs of gcc are provided.
For more details on the supported OS, applicable language and
new information, please visit the CONTEC’s Web site.
Data Acquisition library for MATLAB ML-DAQ
(Available for downloading (free of charge) from the
CONTEC web site.)
This is the library software which allows you to use our analog I/O
device products on MATLAB by the MathWorks. Each function is
offered in accordance with the interface which is integrated in
MATLAB’s Data Acquisition Toolbox.
For more details on the supported OS, applicable language and
new information, please visit the CONTEC’s Web site.
Data acquisition VI library for LabVIEW VI-DAQ
(Available for downloading (free of charge) from the
CONTEC web site.)
This is a VI library to use in National Instruments LabVIEW.
VI-DAQ is created with a function form similar to that of
LabVIEW's Data Acquisition VI, allowing you to use various
devices without complicated settings.
For more details on the library and download of VI-DAQ, please
visit the CONTEC’s Web site.
Specification
Support Software
PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de
