Contec AO-1604CI2-PCI, Руководство пользователя

Страница: 79 / 85

6. About Hardware
72
AO-1604CI2-PCI
Hardware specification
Table 6.1. Specification
Item
Specification
Analog Output
Isolated specification
Isolated independently
Number of output channels 4ch
Output range Bipolar ±10V, Unipolar 0 - +10V
0 - 20mA (Jumper setting by channel)
Absolute max. output current ±5mA (Voltage output) ±10V, 0 - +10V
Load register (Max.)
500 Ω (Current output)
Output impedance
10 Ω or less (Voltage output)
Resolution 16bit
Non-Linearity error *1
±5LSB (±10V, 0 - +10V), ±15LSB (0 - 20mA)
Conversion speed
20
μ
sec (Max.)
Voltage output control relay AQY221N2SX (Matsushita Electric Works, Ltd.) or equivalent to it
Sampling clock Internal sampling clock : 20,000 - 1,073,741,824,000nsec (Can be set in 250n sec units)
External sampling clock : opto-coupler isolated input
(corresponding to current sink output)
Programmable timer
Setting frequency
500 - 1,073,741,824,000nsec (Can be set in 250n sec units)
Timer output signal
Opto-coupler isolated open collector output (current sink type)
External trigger input
External trigger input signal
Opto-coupler isolated input (corresponding to sink output)
Status
Trigger input, trigger input overrun
I/O address 32 ports boundary
Interrupt level 1 point
Isolation voltage 500Vrms
Power consumption +5VDC 2400mA (Max.)
Operating condition 0 - 50ºC, 10 - 90%RH (No condensation)
Bus specification PCI (32bit, 33MHz, Universal key shapes supported *2)
External dimensions (mm) 176.41(L) x 106.68(H)
Used connector 37-pin D-SUB connector [F(Male) type]
DCLC-J37SAF-20L9E [mfd.by JAE] equivalent to it
Weight 160g
*1 When the environment temperature is near 0ºC or 50ºC, the non-linearity error may become larger.
The error can be reduced by calibrating under the actual temperature conditions.
*2 The board re5V power supply from the expansion slot (it does not work in a +3.3V environment).