CONSTRUCTA CH0302.0, Инструкция по эксплуатации

Страница: 42 / 96

42
Setting the oven
You have several options for setting the oven. In this section,
we will explain how you can select the required type of heating
and temperature or grill setting.
Types of heating and temperature
Example in the picture: Top/bottom heating, 190 ºC.
1.
Use the function selector to select the required type of
heating.
2.
Use the temperature selector to set the temperature or the
grill setting.
The oven heats up.
Switch off the oven
Turn the function selector to the off position.
Changing the settings
You can change the type of heating, temperature and grill
setting as required.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
■
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
■
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
The control
panel
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaners or glass
scrapers for cleaning.
Stainless-steel
surfaces
Clean with warm soapy water and a soft cloth.
On stainless-steel surfaces, always wipe par-
allel to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. The stain-
less-steel fronts can be polished using a spe-
cial care product. Follow the manufacturer's
instructions. You can purchase special stain-
less-steel cleaner from our after-sales service
or from specialist retailers.
Enamel sur-
faces and lac-
quered
surfaces
Wipe with a damp cloth and some washing-up
liquid. Dry with a soft cloth.
Rotary knobs
Wipe with a damp cloth and some washing-up
liquid. Dry with a soft cloth.
Glass panel Clean using glass cleaner. Do not use any
abrasive cleaning agents or sharp metal
objects. These could scratch and damage the
surface of the glass panel.
Seal
Wipe with a damp cloth. Dry with a soft cloth.
Oven interior
Warm soapy water or a vinegar solution. If
there are heavy deposits of dirt, only use oven
cleaner on cold surfaces.
Glass cover
for the oven
light
Wipe with a damp cloth and some washing-up
liquid. Dry with a soft cloth.
Accessories Soak in warm soapy water. Clean with a brush
or sponge.