3
Press and hold the TIME button for 5 seconds.
The minutes will be flashing - use TEMP and
MODE buttons to set minutes.
Press TIME button
The hours will be flashing - use TEMP and
MODE buttons to set hours.
Press TIME button
The day will be flashing - use TEMP and MODE
buttons to set Day.
Once you are happy with the settings, press
TIME to return to main screen.
Setting the Time and Day
Setting up a programmed Time
Locking / Unlocking the buttons
Press and hold the TIME & TEMP buttons for 5 sec-
onds or until you hear a noise.
Temporarily override
temperature in PROG mode
You can temporarily override the temperature in
PROG mode by pressing TEMP and then using the
TEMP and MODE buttons to set the new
temperature. Leave the display to time out, and
the new set temperature will be maintained until the
next program step.
1. Press and hold PROG for 5 seconds to enter
the time setting.
2. The day will be flashing.
3. Use TEMP and MODE to navigate day, press
PROG to select day.
4. PROG 1 will be flashing. Use TEMP and MODE
to navigate programme, use PROG to select
programme.
5. The minutes will be flashing.
6. To set minutes, use TEMP and MODE change
minutes, and then press PROG to confirm the
minutes.
7. The hour will now be flashing
8. To set the hour, use TEMP and MODE to
change hour, press PROG to confirm the hour.
9. The temperature will now be flashing.
10. To set temperature, use TEMP and MODE to
change temperature, press PROG to confirm
the temperature.
To add another programme repeat steps 2-10.
Copy day function
If you require the same set of programmes
throughout the week it is possible to copy all the
programmes from one day to another.
To do this, when in programming mode press
and hold the TIME button and this will bring you
to the copy day mode. To select which day you
wish to copy press the PROG button and this will
cycle through numbers 1-7 on the screen, this
relates to which day you would like to copy.
1=MON, 2=TUE, 3=WED etc.
To select which day you would like to copy the
programmes to, use the TEMP & MODE to navi-
gate to the day. Once both are selected, press
the time button to copy the day. The ‘to’ should
blink.
Set program inactive
If you do not require the use of all 6 programmes
they can be set as inactive. When in programming
mode select the programme you want to make
inactive and press the TIME button. If the
programme is inactive the display will show “- -:- -”.
To activate the programme again press the TIME
button.
Setting Temperature for
Comfort, Setback and Boost
When you are in the required mode, simply
activate the display by pressing any of the
buttons, then press the TEMP button. You will now
see the set target temperature, and can adjust it
using the TEMP and MODE buttons. Once finished,
let the screen time out and the settings will be
saved.
06:00
10
20
08:00
19ºC
4ºC
ºC
12:00
22ºC
14:00
16:00
16ºC
22ºC
10ºC
22:00
PROGRAM 1
PROGRAM 2
PROGRAM
3
PROGRAM
4
PROGRAM 5
PROGRAM 6
An example of one day program on SLTI
