Consort C6010, Руководство пользователя

Страница: 11 / 40

C6010 • C6020 • C6030 C6010 • C6020 • C6030 C6010 • C6020 • C6030 C6010 • C6020 • C6030
88
Data-logging Data-logging
1. Press MODE .
2. Select [MENU] and press OK .
3. Select [DATA] and press OK .
Start the data-logging:
1. Select [ACTIVATE] and press OK .
2. Decide whether data-logging should be carried out or not and press OK .
3. Select [CONTINUOUS] and press OK .
4. Decide whether the oldest data should be overwritten when the memory limit
is reached or not and press OK .
5. Select [INTERVAL] and press OK .
6. Select the desired time interval between the data-logging and press OK .
7. Return to the measurements by pressing MODE .
8. The data-logging starts according to the previous settings while the display
shows the logging-number e.g. [LOG.00027].
Process the stored values:
1. Select [PROCESS] and press OK .
2. Select [TABLE] or [SEND] to display or send the stored data and press OK to
con ti nue. Follow the in struc tions on the screen.
Erase the stored values:
1. Select [PROCESS] and press OK .
2. Select [ERASE] and press OK . Follow the in struc tions on the screen.
USB
1.
Press
MODE
.
2.
Select [MENU] and press
OK
.
3
.
Select [USB] and press
OK
.
4
.
Select [INTERVAL] and press
OK
.
5.
Select the desired in terval between the trans mitted data and press
OK
. Pre-set
to zero if no automatic transmit ting is re qui red.
6.
Select [BAUD] and press
OK
.
7.
Select the desired baud rate and press
OK
.
• You can download a suitable USB driver from www.consort.be.
User standard tables
1.
Press
MODE
.
2.
Select [MENU] and press
OK
.
3.
Select [USER TABLES] and press
OK
.
4.
Select [pH buffers] or [S/cm standards] and press
OK
.
5.
Follow the in struc tions on the screen to enter the different values. The value
for 25°C is obligatory!