22
49-2000225 Rev. 0
Cleaning the Glass Cooktop
CARE AND CLEANING:
Cleaning the Glass Cooktop
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
®
Ceramic Cooktop Cleaner
on the glass cooktop . Other creams may not be as
effective .
To maintain and protect the surface of your glass
cooktop, follow these steps:
1 . Before using the cooktop for the first time, clean it
with CERAMA BRYTE
®
Ceramic Cooktop Cleaner .
This helps protect the top and makes cleanup easier .
2 . Daily use of CERAMA BRYTE
®
Ceramic Cooktop
Cleaner will help keep the cooktop looking new .
3 . Shake the cleaning cream well . Apply a few drops of
CERAMA BRYTE
®
Ceramic Cooktop Cleaner directly
to the cooktop .
4 . Use a paper towel or
CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops
to clean the entire cooktop
surface .
5 . Use a dry cloth or paper
towel to remove all cleaning
residue . No need to rinse .
NOTE:
It is very important that
you DO NOT heat the cooktop
until it has been cleaned
thoroughly .
Burned-On Residue
NOTE:
DAMAGE to your glass surface may occur if you
use scrub pads other than those recommended .
1 . Allow the cooktop to cool .
2 . Spread a few drops of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner on the entire burned residue area .
3 . Using the included CERAMA BRYTE
®
Cleaning Pad
for Ceramic Cooktops, rub the residue area, applying
pressure as needed .
4 . If any residue remains, repeat the steps listed above
as needed .
5 . For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner and a paper towel .
Heavy, Burned-On Residue
1 . Allow the cooktop to cool .
2 . Use a single-edge razor blade scraper at approximately
a 45° angle against the glass surface and scrape the
soil . It will be necessary to apply pressure to the razor
scraper in order to remove the residue .
3 . After scraping with the razor scraper, spread a few drops
of CERAMA BRYTE
®
Ceramic Cooktop Cleaner on the
entire burned residue area . Use the CERAMA BRYTE
®
Cleaning Pad to remove any remaining residue .
4 . For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner and a paper towel .
The CERAMA BRYTE
®
Ceramic Cooktop Scraper and
all recommended supplies are available through our
Parts Center . See instructions under “To Order Parts”
section on next page .
NOTE:
Do not use a dull or nicked blade .
Clean your cooktop after each
spill . Use CERAMA BRYTE
®
Ceramic Cooktop Cleaner .
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops .
