Filling
Fill the lighter only with the commercially available lighter gas (butane gas).
Fill the gas tank only in properly ventilated areas and thereby avoid any open
flames (risk of explosion!).
Please pay attention to the safety instructions and instructions for use of the
lighter-gas manufacturer.
The lighter may be filled only in a cooled state.
Stop the process immediately if gas starts coming out while filling. A
combustible mixture of gas-air can arise in this case. Please see to it that the
room has been adequately ventilated, before you ignite the universal lighter or
any other ignition sources.
•
Rotate the lighter such that the filling valve points upwards.
•
Attach the lighter-gas bottle (by means of a suitable adapter, if needed) on the filling valve.
Push the gas bottle now vertically downward.
•
The gas now flows only in the gas tank of the lighter. The filling process takes approx. 3
seconds.
Usage
Push the ignition button forward with a quick and sudden movement till it
comes to a stop. This avoids the build up of a large quantity of combustible
mixture through a longer discharge of gas without ignition, which then gets
ignited abruptly by the sparks and causes a momentary flash.
Keep the lighter away from the body and clothes while lighting and while
using.
Always keep the lighter in such a position that the flame points away from
you.
Always light the flame for only a few seconds, as otherwise the casing of the
lighter can heat up strongly (risk of burning!).
Make sure that the flame is completely extinguished after use.
•
Push the large ignition button forward with a sudden movement, till the piezo igniter is triggered
and the flame ignites (repeat, if the flame does not ignite immediately).
•
To extinguish, simply release the ignition button.
•
Press the small button on the hand-grip to switch on the LED-light.
•
To switch-off, simply release the button.
Adjusting the flame height
•
Fold out the adjustment clip at the filling valve.
•
Rotate the adjustment clip in the clockwise direction to reduce the flame height or in the anti-
clockwise direction to increase it.
