44
c) Activating Setting Mode
Various basic settings are possible in the setting mode. The time and date can be entered
manually here as well if no DCF reception is possible.
The following functions are available:
• Setting the Time Zone
• Selecting 12/24 h mode
• Manually setting the time (hours/minutes)
• Manually setting the date (year/month/day)
• Selecting temperature unit (°C, °F)
• Calibrating indoor humidity
• Calibrating outdoor humidity
• Selecting unit of the barometric pressure (“hPa” or “inHg”)
• Calibrating barometric pressure
• Setting barometric pressure steps for weather forecast (default 2 hPa)
• Setting barometric pressure steps for weather icon “Storm” (default 4 hPa)
The setting mode is started by pushing the button “SET” for two seconds. The weather
station then emits a sound signal.
Briefly pushing the button “SET” takes you to the respective next setting.
Use the button “+” or “MIN/MAX” to change the set value. Keeping the respective
button down for some time will adjust quickly.
Leave the setting mode by briefly pushing the button “SNOOZE/LIGHT” or make the
last setting (alternatively wait for 10 seconds without pushing any button).
Proceed as follows:
• Hold down the button “SET” for 2 seconds. The time zone figure flashes in the top display
line.
Use the button “+” or “MIN/MAX” to adjust the time zone in the area of +12 to -12 hours.
• Briefly push the button “SET”; “24H” or “12H” flashes in the upper left of the display.
Use the button “+” or “MIN/MAX” to switch the display 24 h and 12 h mode. In 12h mode, “PM”
is displayed to the left of the time in the second half of the day.
• Briefly push the button “SET”; the hours of the time flash.
Set the hours with the button “+” or “MIN/MAX”.
