Conrad Sygonix 1597114, Инструкция по эксплуатации

Страница: 23 / 33

- 23 -
Sensors – Configure sensor
Note that sensors that do not allow for
parameter adjustment are not listed in the
sensor configuration panel.
1. Go to the app landing page.
2. Touch if it is not already selected.
3. Select the gateway from the device list.
4. Touch
Alert Mode .
5. Select a sensor and edit its configurations:
Enable
Sensor
Disable and enable the sensor
Ring tone
Select the sound to be played
when the sensor is triggered.
Select 'No ring' for no sound.
Light
If you want the see a notification
light on the gateway when the
sensor is triggered enable Light ,
else disable it.
Set the colour and brightness of
the notification light.
6. Touch Save to save the configurations.
7. Touch
Save
again to save the
configurations under the Alert mode.