Conrad Jaxster 3D HD, Руководство пользователя

Страница: 8 / 32

7
Fig. 5 Satellite LNB configuration
During satellite dish LNB and cables installation you can easily check the signal and the list of the channels available
on the selected frequency by entering test transponder parameters into the
Test transponder section in the
Satellite LNB configuration window. Then move the cursor on the
“check signal” line and the STB starts tuning on
the test transponder parameters.
Fig. 6 Satellite LNB configuration, check signal
In case the signal was successfully locked, you can quickly scan the programs on the selected frequency by
pressing the blue button. It helps to identify the satellite (
See Fig 6 ). The programs list is seen on the screen and is
not saved. As soon as you finish LNB configuration, press yellow button to confirm and save your configuration. Pls
note, that test transponder parameters are not saved.