Conrad Jaxster 3D HD, Руководство пользователя

Страница: 15 / 32

14
Fig. 18 Satellite transponder
MENU>Settings>Channel search>Satellite auto search you can select a satellite from the list of previously added
ones and scan channels either on the selected transponder only or on all transponders available. Press blue button
to check the list of channels available on the selected transponder. (no information is saved). You can also select
network scan
ON . In this case, when channels search is finished on the selected transponder, the receiver checks
NIT table. In case NIT table is available, the receiver takes the transponders table from NIT and search channels on
these transponders as well. If you select search style = update, the system adds new found channels. Alternatively,
if you select complete search, the system deletes all channels from the selected satellite and replace them with the
newly scanned. If you select
style = full, the system updates all channels only from the scanned transponders. You
can also set up various filters. Filters help to mark scanned channels for their future storage in the database of the
receiver. Press red button to start the search.
Fig. 19 Satellite auto search
MENU>Settings>Channel search>Satellite Manual search searches the channels on the selected transponder by
entering it manually See Fig 20 . The tuner is loaded by all tune parameters when you move the cursor to the Level
position. The search options are the same as for the auto search.