DYON RAPTOR
5
EN
2 Front and Rear Panel Illustration
1. Front panel
1. LED Display:
Used to display information.
2. DVB-C Signal indicator (
green if signal
)
3. CH+ (
Navigates through the Menus. Selects the next Channel
)
4. CH- (
Navigates through the Menus. Selects the previous Channel
)
5. Standby (
Used to switch the set top box to on or standby
)
Stand-by-indicator ()
Caution
:
If possible, please connect USB devices directly to the DYON Harrier's USB interface.
If this is not possible, use only USB extension cables not exceeding 25 cm.
2. Rear panel
1. AV Video Output:
This socket outputs analog audio L/R / video signal.
2. RF-Input:
Used to connect the cable to receive the signal.
3. RF-Reloop:
This socket will bypass the RF signal to another STB.
4. Powerswitch:
Turn on / off the engine.
5. Coaxial:
This socket connects to a coaxial socket on your surround sound system.
6. TV Scart:
This socket connects to your TV.
7. HDMI OUT:
This socket connects to HDMI in device.
8. USB-Port:
Data input from USB storage devices.
!!!!!ATTENTION!!!!!
THE DEVICE HAS A POWER SWITCH. IN THE CASE THE POWER SWITCH IS IN OFF
POSITION, THE DEVICE CANNOT WORK!!!
