First allow the stop watch to reach a room temperature before
using the product.
Avoid the adverse ambient conditions below in using or transporting
the stop watch:
- Moisture or too high an air humidity
- Extreme cold or heat
- Dust or inflammable gases, vapours or solvents
- Heavy vibrations
- Strong magnetic fields as are found in the vicinity of machinery or
loudspeakers
13. Maintenance and cleaning
Remove the battery if the watch is damaged because there could be
a short-circuit causing excessive heat (danger of fire, battery leak-
age).
Safe operation must be presumed to be no longer possible, if
- the watch exhibits visible damage
- the watch does not operate any longer
- the watch was stored under unfavourable conditions for a long
period of time or
- the watch was exposed to extraordinary stress caused by trans-
port.
Before cleaning or maintaining the stop watch do not fail to
observe the safety instructions which follow:
32
1. Features
• Thee-line LC display
• Hour/Date and alarm function
• Max. measurable time : 9 hours, 59 minutes, 59.99 seconds
(Graduation 1/100 second)
• Maximum of 128 intermediate memories (displaying LAP/SPLIT
times)
• Dual countdown timer
• Practical wrist strap
• With battery inserted (Type: CR2032)
• Frequency extrapolation
• Power-save mode (automatic stop after abt. 9 hours)
2. Scope of delivery
• Stop watch
• Instructions for use
3. Safety instructions
Any claims for guarantee will become invalid in the
event of damage that results from the non-obser-
vance of the operating manual.
We do not accept responsibility for such damage.
Keep the product out of the reach of children,
Do not expose the watch to direct solar radiation, intense heat or cold.
Handle the product carefully because it will be damaged already by
shocks, bumps or a fall from a low height.
21
