12. Zoom mode (QVGA)
Press the “Zoom” button
(16) to enter or exit zoom mode (QVGA). When zoom
mode is active, “ZOOM” is displayed to indicate it (see chapter „9. Display indica-
tors”).
If you are not in zoom mode, you are in normal display mode (VGA).
In zoom mode, you can move the camera image up, down, left, or right. To do that,
hold down the “Up”
, “Left”
, “Down”
, or “Right”
sections of the multi-
function button (14).
Press the “Zoom”
button (16) again to exit zoom mode. “ZOOM” is no longer
displayed.
13. Quad display or automatic switching between
channels
You can manually select the individual camera channels by shortly pressing the
camera channel selection button
(15).
You can also set a time (5, 10, 15, or 20 seconds) to automatically switch to the next
camera channel. Proceed as follows to use this function:
• Press “OK” on the multi-function button (14) of your receiver. The settings menu
opens up.
• Press the “Up”
or “Down”
section of the multi-function button (14) to
select menu item “Scan Time”.
• Press the “Left”
or “Right”
section of the multi-function button (14) to
select the desired time (5, 10, 15, or 20 seconds).
41
