• This camera system uses and generates high frequency ener-
gy. If the devices are not installed and operated in accordance
with these instructions, they can cause radio interferences. If
a wireless camera system causes interference in other devi-
ces, attempt one or more of the following measures listed
below in order to restore normal function:
- Change the position of the camera.
- Increase the distance between the affected device and the
wireless camera/the monitor.
- Select a different transmission channel.
• After rapid changes in temperature, the system components
require a certain time to stabilise and adjust to the ambient
temperature before the camera can be operated.
• The system components are no toys and should be kept out
of the reach of children!
• The supplied wall power supplies conform to protection class
II. They may only be connected to a standard 230V~/50Hz hou-
sehold mains supply socket.
• Please contact a qualified expert if you are not sure about the
safety or the correct use of the system components.
• Never leave the packaging material lying around unattended.
Plastic foil/bags etc. can become dangerous toys for children,
there is risk of suffocation.
• If you have reason to assume that safe operation is no longer
possible, disconnect the device immediately and secure it
against inadvertent operation.
• It can be assumed that safe operation is no longer possible if:
- the device shows visible damage
- the device no longer functions
- the device was stored under unfavourable conditions over
a long period of time
or
- following considerable stress during transportation.
30
