background image

2.4 GHz Digital Radio Camera 

Version 03/09

incl. Rechargeable Battery

°

Order No. 75 16 17

Intended Use

This 2.4 GHz mini radio camera set is intended for installation in, and the protection of, seclud-
ed or critical areas (e.g. the surveillance of stores, intercom systems, entrances etc.). 

The camera and the power supply unit provided are only intended for operation in dry indoor
locations. 

Due to an intelligent frequency hopping technology, the systems has a secure, digital radio con-
nection with a range of up to 200 metres in open fields.

The picture and sound transmission to the receiver takes place wirelessly at a frequency of 
2.4 GHz.

The power is supplied via the power supply unit (5 V/DC) provided. In addition, the camera has
an integrated LIPO battery (3.7 V/DC, 1100 mAh).

Please bear in mind that it is prohibited by law to observe strangers with a camera without their
knowledge and consent.

Operating the product in any other way than described above is not permitted and may lead to
damage to the product, which can give rise to risks such as short circuit, fire and electric shock.
The product must not be modified or converted. Always observe the safety instructions included
in these operating instructions. Read the operating instructions carefully and keep them for later
reference.

Symbols

A lightning-bolt symbol in a triangle indicates a health hazard, e.g. danger of elec-
tric shock.

This symbol, with an exclamation mark in a triangle, indicates particular dangers
associated with handling, function or operation.

The “Hand” symbol indicates special tips and operating information.

Safety Instructions

The warranty will lapse in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for material and per-
sonal damage caused by improper use or non-compliance with the safety
instructions!

The exclamation mark indicates important information in these operating
instructions that should always be observed.

• The camera and the power unit must not be modified or converted, as not

only the CE certification will become void but also the warranty. 

• The camera and the power unit should not be exposed to extreme temper-

atures, direct sunlight, intense vibration or heavy mechanical stress.

• Where the devices are used connected to other devices e.g. a television

screen, the operating instructions and safety notices of the devices con-
nected must be followed.

• The use of the surveillance camera system does not replace the personal

supervision of children, or people who require special assistance, but only
serves as a support to this supervision.

• The internal LIPO battery may only be recharged with the power supply unit

provided.

• This camera system uses and generates high frequency energy. If the

device is not installed and operated in accordance with these instructions,
it can cause radio interference. If the wireless camera system causes inter-
ference to other equipment, try one or more of the following measures list-
ed below, in order to restore normal operation:
-  Change the position of the camera.
-  Increase the distance between the device affected and the radio camera

or the receiver for the radio camera system. 

-  Select another transmission channel.

• After rapid changes in temperature, the camera and the power unit requires

some time to stabilise, in order to adjust to the surrounding temperature,
before it can be used. 
Wait until the product has reached room temperature, before use.

O P E R A T I N G   I N S T R U C T I O N S

www.conrad.com

• Electronic devices are not toys and should be kept out of the reach of chil-

dren! 

• The power supply unit conforms to protection class II. It may only be

plugged into a standard household 230V~/50Hz mains socket.

• Please contact a qualified person if you are unsure about the safety and

correct use of the system components. 

• Never leave the packaging material lie around unattended. Plastic film/bags

etc. can be dangerous playthings for children, there is a risk of suffocation.

• If you have reason to assume that safe operation is no longer possible, dis-

connect the device immediately and secure it against inadvertent operation.

• Never plug in, or remove, the power unit when your hands are wet.
• Never pull on the power cable; only unplug it at the power outlet.
• In the event of a thunderstorm, unplug the power supply unit for safety rea-

sons.

• It can be assumed that safe operation is no longer possible if:

-  the device is visibly damaged,
-  the device no longer works and
-  the device has been stored under unfavourable conditions for a longer

period of time
or

-  it has been subjected to considerable stress in transit

• In commercial institutions, the accident prevention regulations of the

Employer’s Liability Insurance Association for Electrical Systems and
Operating Materials are to be observed.

• The provided camera and power supply unit must not become damp or wet.

The product is approved only for use in dry rooms.

• Maintenance, adjustment and repair may only be carried out by a qualified

specialist or a specialised repair shop.

• If you have any questions, which are not answered in this manual, please

contact our technical service or another specialist.

General Notes about Batteries

• Keep batteries out of the reach of children.
• Do not leave the batteries lying around in the open; there is a risk of them being swallowed by

children or domestic animals. If swallowed, consult a doctor immediately.

• If your skin comes into contact with leaking or damaged batteries, you may suffer burns. For

this reason you should use suitable protective gloves.

• Make sure that the batteries are not short-circuited, taken to pieces or thrown into a fire. There

is a risk of explosion!

• Do not recharge normal batteries. There is a risk of explosion! Only charge rechargeable bat-

teries which are intended for this purpose; use a suitable battery charger.

• Old batteries/rechargeable batteries can leak and cause damage to the product; loss of guar-

antee/warranty! 

• For the environmentally-friendly disposal of batteries and rechargeable batteries, please read

the chapter “Disposal of used batteries/rechargeable batteries”.

Product Description

1) Antenna
2) “Battery” LED 
3) “Link” LED

Used when searching for a connection
(see the operating instructions for your
receiver).

4) “POWER” LED
5) Microphone
6) Camera lens
7) “ON/OFF” button
8) “Link” button
9) Connection “DC IN 5V”

Positioning the Camera

Find a suitable place for the installation from which the object to be monitored can be observed.

A suitable place for the installation of this camera has the following features:

• an even and vibration-free surface
• no direct sunlight
• Dry indoor area

Содержание 75 16 17









Отзывы: