Conrad 596113, Руководство по эксплуатации, Страница: 48 / 132

48
• After.disconnecting.the.power.adapter,.close.the.DC 6V connection socket cover to prevent water
from entering the housing.
• Switch the TEST OFF CAM PSET switch to CAM position or PSET position.
11. Inserting an SD card
Warning
Always.turn.off.the.camera.when.removing.or.inserting.an.SD.card..Removing.an.SD.card.
during operation can cause damage to the camera.
When.the.SD.card.is.full.after.recording,.the.camera.stops.and.the.LC.display.shows.
"FULL".
The.SD.card.slot.can.accept.SD.cards.with.Class.6.and.lower.(downward.compatible.to.Class.2).up.to.
32.GB..An.SD.card.is.not.included.in.the.delivery.content..The.LC.display.shows.the.number.of.images.
saved.to.the.SD.card..If.no.SD.card.is.in.the.SD.card.slot,.the.LC.display.shows."NOSd"..Recording.is.
not.possible,.if.there.is.no.SD.card.installed,.as.the.camera.itself.does.not.have.any.internal.memory.
• Fully insert an SD card into the SD card slot SD CARD.(23).until.it.clicks.into.place..Heed.the.
correct insert position as indicated on the product.
• To.remove.the.SD.card,.push.it.in.slightly.and.then.withdraw.
SD cards must be clean and undamaged and should contain no images from other
sources..Before.using.SD.cards.from.other.cameras,.first.format.them.on.your.computer.
(FAT32).before.using.them.with.the.product..
The.following.file.systems.are.not.supported:
NTFS,.exFAT