These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro
fi
lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.
Care and Maintenance
The product does not require maintenance. Never disassemble the product (except for perfor-
ming the work described in this operating manual).
The used LED lights have a long durability; they do not need to be and cannot be replaced.
Switch off the wall mounted light or disconnect it from the mains supply before cleaning.
The exterior of the light should only be wiped with a clean, soft, dry cloth. For stronger conta-
mination, use a cloth which is slightly moistened with lukewarm water.
Do not use aggressive cleaning agents or chemical solutions which could damage the housing
(discolour) or impair the operation.
Do not press too hard on the glass insert or housing, as scratches might appear.
Never direct a jet of water, e.g. from a garden hose or a high-pressure cleaner, onto the wall
lamp once it is installed!
Disposal
Please dispose of the product according to the relevant statu tory requirements.
Technical Data
Operating Voltage: ............... 220 - 240 V/AC, 50 Hz
Power: .................................. 2.4 W
Light source: ......................... 18 white LEDs, not replaceable
Protection class: ................... IP44
Safety class: ......................... II
Dimensions (Ø x H): ............. 145 x 59 mm
Mounting location: ................ Wall mounting, only vertical walls
(for orientation of the wall mounted light on the wall see the
arrow printed on the light)
