These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro
fi
lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.
Installation
• There are two rubber pins on the bottom of the towel
drier. If these are covered with protective caps,
please remove them.
• Place the two plastic connectors on the threaded
pins, correctly aligned;
fi
nally, mount the two enclosed
U-shaped stands. Fix each stand with a fastening nut.
☞
Do not use tools to tighten the two fastening nuts and do not apply any force!
• Place the towel drier on its stands on the
fl
oor.
Operation
• Turn the on/off switch off (switch position “0”).
• Insert the towel drier’s mains plug into an earthed mains socket.
• Switch on the towel drier (switch position “I”). It starts to warm up.
• Place one or more textiles (depending on the size) on the towel drier. Remove the textiles
from the towel drier when they are dry (or are warm enough).
• If the towel drier is no longer needed, switch it off (switch position “0”) and unplug the mains
plug from the mains socket.
Let the towel drier cool down completely and store it in a clean, dry place.
Maintenance and Cleaning
• Maintenance or repairs may only be performed by quali
fi
ed personnel or a specialised repair
shop. The product contains no parts that require servicing. Therefore, do not open/dismantle
it.
• The towel drier must be switched off before cleaning. Furthermore, unplug the mains plug
from the mains socket. Then allow the towel drier to cool down completely.
• To clean the outside of the product, a dry, soft and clean cloth is suf
fi
cient. If it is very dirty,
the cloth should be moistened slightly with tap water.
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions,
since these could damage the housing or even impair operation.
Disposal
Dispose of an unserviceable product in accordance with the relevant statutory regu-
lations.
Technical Data
Operating voltage .........................230 V/AC, 50 Hz
Heating power: .............................100 W +/-10%
Cable length .................................1 m
Protection class ............................IP21
Dimensions (H x W x D) ...............950 x 500 x 310 mm
Weight ..........................................2.65 kg
☞
Small variations in dimensions and weight are due to the production technique.