B5
B6
x1
x1
2
x4
x4
1
repeat
1
2
4
5
B7
3 20s
x1
x1
Your system will automatically detect the number of elements when all elements are connected
and the power is turned on. In the event of defective elements, check whether all connectors
are correctly inserted in the case and then switch the power on again.
c)
Offline/online usage
C1
For offline use (without Wi-Fi), the included controller can be used. With
the controller, preset effects cannot be changed.
ON/OFF
Dynamic effects
(Long press to change speed)
Themes
Long press
C2
Online use via app
Wi-Fi Router
App
Mobile app
a) App system requirements:
•
iOS 9.0/Android 5.1 or later
• Wi-Fi connection
• Smart Life app (available in app stores or via QR code)
b) Device pairing
Open the mobile app.
1. Touch ‘Add Device’ or the ‘+’ symbol in the top-right corner of the app interface.
2. Devices can be added by touching ‘Add Manually’ or ‘Auto Scan’ (preferred).
To manually add a device:
- Touch ‘Add Manually’
- Touch ‘Lighting’
- Touch ‘Light Source (Wi-Fi)
3. Then enter the Wi-Fi details and touch ‘Next’.
Note:
Touch ‘
’ to show the entered Wi-Fi password.
4. Next, reset the device:
- Connect the power adapter.
- Press ‘
’ for 5 seconds and the Blue indicator light will start flashing.
-
Choose ‘Confirm indicator rapidly flashing’ and touch ‘Next’.
Note:
The pairing process must be completed within 3 minutes of resetting the device.
5 If the device is successfully paired, the page will automatically jump to the next step and
the blue indicator light will stop flashing and remain illuminated.
Note:
If the device did not pair, check that the Wi-Fi signal is strong enough and the de-
vice is powered on, and then try to pair again. If this does not work, try adding the device
manually.
Once the device is paired, it will be confirmed on-screen. The device can be renamed at
any time.
6. Touch ‘Done’ to view the ‘Control panel’ and use the product.
Care and cleaning
• Disconnect the product from the mains before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
•
Clean the product with a dry, fibre-free cloth.
