Connex Connex350, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 68

DOC-13000 Rev. E
7–23
Connex500/350 User Guide
Cleaning and
Replacing the
Wiper
A rubber wiper removes excess material from the print heads after the
purge sequence. This is done automatically before each print job, and
performed manually during maintenance tasks. You should clean the
wiper and surrounding area at least once a week. If the wiper is damaged
or worn, replace it.
To inspect and clean the wiper:
1. Prepare—
•
isopropanol (IPA—isopropyl alcohol) or ethanol (ethyl alcohol)
•
disposable cleaning gloves
•
an Objet ‐ supplied cleaning cloth or equivalent
•
a spare wiper
2. Start the Wiper Cleaning wizard from the Options menu of the printer
interface.
Figure 7-26: Starting the Wiper Cleaning wizard
3. Close the printer cover, and click Next in the wizard screen.
4. Make sure that the build tray is empty, and close the printer cover.