6
Azden IRR-40P ‒ User & Installation Guide B460IRR40P V1.0
Azden IRR-40P Soundfield
Swift
TX
microphone transmitter
The two parts of the neck clasp
may be pushed together or
pulled apart either directly or
by sliding.
To turn on the Swift
TX
press and hold the on button until the status indicator lights. Similarly
to turn off or mute the Swift
TX
press and hold the button until the indicator goes out.
Charge socket
Emitter
window
Aux
socket
Microphone
socket
Vol +
Vol ‒
On/Off/Mute
15
0
m
m
Status indicator:
Green =
on
Alternating red/green = recharge soon
Red =
charging
Orange = charged
Transmitters
Indicator LED
The indicator LED shows green, red or orange, depending on the status or mode of the Swift
TX
.
In normal use:
Solid green
‒
the Swift
TX
is on and
working.
Alternating green/red
‒
the battery
is low and the unit needs to be
recharged.
No indication
‒
the unit is switched off.
When charging:
Solid red
‒
the Swift
TX
is charging normally and is
turned off.
Flashing red
‒
there is a problem with charging ‒
try fitting a new 'exposed end rechargeable
battery' .
Solid orange
‒
the Swift
TX
is charged, it is turned
off and the charger has switched to trickle charge.
Adjusting the neck strap
Correct positioning of a transmitter is important. The Swift
TX
should be
worn so that the emitter faces forwards and the unit rests about 150mm
(the length of a biro) below the mouth ‒ this means it should sit just
below your collarbone.
Both straps can be easily adjusted as required, using the sliders.
Note ‒ replacement straps are available, please see www.DeafEquipment.co.uk
45IRTXSTRAP Replacement strap 45IRTXSCLIP Replacement clip
