4
CTSMT011.2_IG_v1
360 CAMERA FUNCTIONALITY
ISO Connector
Connect to aftermarket
stereo
3x OEM Specific Connectors
Connect to corresponding
connector from vehicle
Stereo Connection (Patch)
Lead Connector [12 Pin]
Connect to Interface Box
Note: Must be connected
first, before power connection
is made to the interface
Main Wiring Loom
Connector [20 Pin]
Connect to Interface Box
Interface Box
White/Red RCA Connectors (AUX)
Connect to aftermarket stereo
Flying Wires
Pink - Speed Pulse
Green - Park Brake
Purple - Reverse Gear
Male Yellow RCA Connector
Connect to aftermarket
stereo camera input
AUX
CAM
USB Retention Lead
Connect to vehicle
Connect to aftermarket stereo
Access of the 360 Camera:
When not in reverse
- a short initial press of the ‘360 view’ button on the steering wheel will showcase the
‘front view & 360 panoramic view’
(Figure 1)
. A second short press of the button will then switch the display
to the ‘front view & side view’
(Figure 2)
. A third press of the button will exit the 360 function.
(Figure 1)
(Figure 2)
(Figure 3)
WIRING DIAGRAM
When in reverse
- upon engaging the reverse gear, the display will switch to show the ‘rear view & side view’
(Figure 3)
. A short press of the
‘360 view’ button on the steering wheel will switch the display to 'rear view &
360 panoramic view'
(Figure 4)
. Disengagement of the reverse gear will exit the 360 camera mode.
MODE
360 View
(Figure 4)
