CONNECTED OWNER’S
GUIDE
REPLACING REMOTE BATTERIES
Follow the steps below to replace the batteries in your Connected remote:
1. On the backside of your remote, remove the 2x mini-phillips screws and seperate
the front and back part from the transmitter.
2. Remove the old batteries and replace by two new CR2016 batteries.
3. Close back the front and back of the transmitter and reinstall the 2x screws.
WHEN SERVICING YOUR VEHICLE
To ensure safety during vehicle servicing, the remote starter must be placed in “Valet Mode”. The
“Valet Mode” will disable remote start functionality. See your Remote starter manual for Valet mode procedure.
