5.1.
AT Command
You can use the AT command to check the LTE status
example: AT+CSQ. Enter the AT command
AT command responses will be displayed
5.2.
APN Change
Typically, the APN is auto-configured or auto
change the local telecommunication
in
Figure 13
.
If you would like to check whether
“AT+CGDCONT?” See
Figure
.
ER2500T-VZ
ER2500T-VZ
ER2500T-VZ
Connected IO Inc., CONFIDENTIAL
EMU Router User Manual: ER2500T
You can use the AT command to check the LTE status. The AT command format is
AT command and click “Send”.
esponses will be displayed in the message bar right below the command
Figure 12: AT Command Example
configured or auto-detected. The
APN Change command allows you to
elecommunication company. Enter the APN name and click “Change”
Figure 13: APN Change
whether the APN setting is successful, pleases enter AT command
Figure 19: Check APN Function
19
EMU Router User Manual: ER2500T-XX-CAT1
Revision: 3.0
is “AT+ Command” for
e message bar right below the command see
Figure 12
.
Change command allows you to
click “Change” button as shown
eases enter AT command
