4.4.
Firmware Upgrade
Select System from web GUI, and find “
and select the new image that you want upgraded to the device
uploads the file, click “Proceed” on the co
The upgrade process may take longer than 10 minutes for flashing and rebooting. It is important NOT to
power off the device during the process. Administrators can PING the device after the upgrade process is
completed to ensure that the device is programmed and rebooted successfully.
ER2500T-VZ
Connected IO Inc., CONFIDENTIAL
EMU Router User Manual: ER2500T
from web GUI, and find “Backup/Flash Firmware” section. Click the icon “
and select the new image that you want upgraded to the device, then click “Flash image”
uploads the file, click “Proceed” on the confirmation page as shown in Figure 15.
The upgrade process may take longer than 10 minutes for flashing and rebooting. It is important NOT to
the device during the process. Administrators can PING the device after the upgrade process is
to ensure that the device is programmed and rebooted successfully.
Figure 9: Firmware Upgrade
17
EMU Router User Manual: ER2500T-XX-CAT1
Revision: 3.0
” section. Click the icon “Choose File”
, then click “Flash image”. After system
The upgrade process may take longer than 10 minutes for flashing and rebooting. It is important NOT to
the device during the process. Administrators can PING the device after the upgrade process is
