Connect MC9000-G, Руководство по эксплуатируемому оборудованию

Страница: 69 / 85

Error Message Resolution Guide
Message Reason Solution Reference Tech Note
Printer Not Ready\nPress R
to Retry\nC to Cancel Print; Can not print. Check cable, battery, communication
settings and paper in the printer. ---
Mobile Unit
in\nDemonstration
Mode\nfor TwinClient; Running in demo mode. Purchase a license from Connect. ---
Connected to Host; Successful connection to the target Host. Advisory message.
---
Telnet Mode not\nsupported
on\nthis Mobile Unit; This Mobile Unit must be used with a Connect
Server. Order a Connect Server.
---
Telnet Setup files\nnot
found. Reload\nfiles then
switch; Customer specific configuration files are
missing. Load the configuration files into the Mobile
Unit from Twin Client Manager. ---
Switched Client to\nTelnet
Direct Mode; Mobile Unit running in Telnet mode direct to
the target Host. Advisory message.
---
Switched Client to\nServer
Based Mode; Mobile Unit running through a Connect server
in Server mode usually at port 1800. Advisory message. ---
Port 23 is only\nallowed in
Telnet Mode; Can not set the port to 23 in Server mode.
Port 23 is the standard Telnet port. Advisory message. ---
Not Enough Memory\nTo
Run; Mobile Unit does not have the capacity to run
the program do to memory restrictions. Expand the Mobile Unit memory. ---
Press any key; Press a key to continue. Advisory message. ---
TwinClient Telnet; Prompt. Advisory message.
---
Supported Equipment Manual
•
June, 2006
4-7