Dual Port Mini PCIe GbE
Users Guide
Document: CTIM-00074
Revision: 0.00
Page 6 of 12
Date: 2021-11-03
INTRODUCTION
Connect Tech’s MPG110 series board is a rugged, low
-cost dual Gigabit Ethernet Mini PCIe module that
is ideal for adding extra Ethernet capabilities to any system with minimal increase in overall system size
and power consumption. The module utilizes PCIe signaling which allows it to be used in any Mini PCIe
socket that supports PCIe. The wide operating temperature, latching Ethernet connector and cabling
solution allows these modules to be used in harsh environments. Compatibility with Windows and Linux
operating systems allows these boards to be easily integrated into a wide array of new and existing
systems.
Product Features and Specifications
Specifications
Dimensions
50.95 mm x 30 mm
Mini PCIe “Full”
Height above board:
With CTI Thermals: 13mm
Without Thermals: 8.5mm
10/100/1000 BASE-T Ports
2
PCIe
PCIe v2.0 (5.0 GT/s)
Connector
Samtec TFML 2x10, 1.27mm Vertical
Cables (Optional, not included)
CBG510
Environmental
-40°C to 85°C*
,
**
Humidity: 5 to 95%, non-condensing
* 85°C using CTI Passive heatsink and minimum airflow of 50CFM
**Pending Thermal Validation
Status LEDs
2x Link, 2x Activity, Power OK
Power Consumption
3W
The MPG110 is pending thermal validation and this manual will be
updated to reflect required airflow and thermal information at a later date
Part Numbers / Ordering Information
Part Number
MPG110-01
MPG110 with CTI Passive Thermal installed
