Connect Tech BBG001 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 37

Connect Tech BBG001 Скачать руководство пользователя страница 31

Connect Tech BlueStorm/Express User Manual

Revision 0.15

31

Software First Installation (Windows)

Downlaod and extract the latest driver from the website. Run DPInst86.exe (for 32-bit) or
DPInst64.exe (for 64-bit). The installer will guide you through the process.  The board will then be
detected and installed when the board is physically added to the system.  Software First installs are
a great way to update existing drivers.

Hardware First Installation (Windows)

1.

If you haven’t already installed the hardware, turn off the power to your computer and open it
to expose the PCI Express card edge (consult your system’s documentation for more
information on this step).

2.

Choose an available position, and carefully press the card into place. Re-assemble the
computer.

3.

After installing the BlueStorm/Express, turn on your system and the

Found New Hardware

Wizard

should appear. You can also right-click the device in the Device Manager and select

“Update Driver Software…”

«
...
29
30
31
32
33
...
»

Содержание BBG001






































Отзывы:

Нет отзывов