6
BEC23 Technical Manual
Section 3 : Standards
Specifications
IEC 62052-11
Electricity metering equipment (AC)
General requirements, tests and test conditions.
Part 11: Metering equipment
IEC 62053-21
Electricity metering equipment (AC)
Particular requirements
Part 21: Static meters for active energy (classes 1 and 2)
IEC 62055-41
Electricity metering - Payment metering systems
Part 41: Standard Transfer Specification
IEC 60068-2-27
Environmental testing
Part 2: Tests. Test Ea and guidance: Shock
IEC 60068-2-6
Environmental Testing
Part 2: Tests - Test FC: Vibration (Sinusoidal)
IEC 62056-21
Electricity metering - Data exchange for meter reading,
tariff and load control - Part 21: Direct local data
exchange
SANS 1524-1
Electricity payment systems – Prepayment meters
ISO 14001:2004
Environmental management systems
ISO 9001:2000
Quality management systems – Requirements with
guidance for use
ESKOM
SCSSCAAA9
Particular Requirements for Pre-payment Meters
ESKOM
TRMSCAAP2
Surge Arrestors
SANS 767-1
(BEC23PE/T)
Earth leakage protection units
Part 1: Fixed earth leakage protection circuit breakers
VC 8035
(BEC23PE/T)
Earth leakage protection units
Section 4 : Specifications
Voltage Range
•
220-240VAC (phase voltage) –20% +15%
•
Additional voltage ranges available on request
Supply Frequency
•
50Hz + 2%
•
Additional frequency ranges available on request
Current Ratings
•
Maximum current:
-
80 Amps BEC23PL/T
-
20 Amps BEC23PE/T
•
Base current 5 Amps
•
Starting current 0,025 Amps
Total Supply Burden
•
Nominally 1.2W and 9.5VA
Disconnection Device
•
100 Amp single pole bi-stable disconnection switch (BEC23PL/T)
•
60 Amp double pole circuit breaker (BEC23PD/T)
•
20 Amp double pole earth leakage circuit breaker (BEC23PE/T)
