Copyright
©
2015
congatec
AG
TCEDm11
86/96
Feature
Options
Description
USB Mass Storage Device
Name
(Auto detected USB mass
storage devices are listed here
dynamically)
Auto
Floppy
Forced FDD
Hard Disk
CD-ROM
Every USB mass storage device that is enumerated by the BIOS will have an emulation type
setup option. This option specifies the type of emulation the BIOS has to provide for the
device.
Note: The device’s formatted type and the emulation type provided by the BIOS must match for
the device to boot properly.
Select
AUTO
to let the BIOS auto detect the current formatted media.
If Floppy is selected then the device will be emulated as a floppy drive.
Forced FDD
allows a hard disk image to be connected as a floppy image. Works only for drives
formatted with FAT12, FAT16 or FAT32.
Hard disk
allows the device to be emulated as hard disk.
CDROM
assumes the CD-ROM is formatted as bootable media, specified by the ‘El Torito’
Format Specification.
10.4.13 Super I/O Submenu
Feature
Options
Description
Serial Port 0
Disabled
Enabled
Enable or disable serial port 0.
Device Settings
IO=3F8h; IRQ=4;
Fixed configuration of serial port 0 if enabled.
Serial Port 1
Disabled
Enabled
Enable or disable serial port 1.
Device Settings
IO=2F8h; IRQ=3;
Fixed configuration of serial port 1 if enabled.
Parallel Port
Disabled
Enabled
Enable or disable parallel port.
Device Settings
IO=378h; IRQ=7;
Fixed configuration of the parallel port if
enabled.
Device Mode
Standard Parallel Mode
EPP Mode
ECP Mode
EPP Mode & ECP Mode
Set the parallel port mode.
Note
This setup menu is only available if an external Winbond W83627 Super I/O has been implemented on the carrier board.
