![Congatec Conga-TCA Скачать руководство пользователя страница 85](http://html1.mh-extra.com/html/congatec/conga-tca/conga-tca_user-manual_2652472085.webp)
Copyright
©
2015
congatec
AG
TCEDm11
85/96
Feature
Options
Description
SATA Port 0 Hotplug
Enabled
Disabled
Configures this Port as Hot Pluggable.
SATA Port 1
Enabled
Disabled
Enables Port 1.
SATA Port 1 Hotplug
Enabled
Disabled
Configures this Port as Hot Pluggable.
SMART Self Test
Disabled
Enabled
Run SMART self Test on all Hard Disk during POST.
10.4.11 iFFS Submenu
Feature
Options
Description
IFFS Support
Disabled
Enabled
Indicates support for Intel Fast Flash Standby.
10.4.12 USB Submenu
Feature
Options
Description
USB Devices
no option
Displays the detected USB devices.
Legacy USB Support
Enabled
Disabled
Auto
Enables legacy USB support. Auto option disables legacy support if no USB devices are
connected. Disable option will keep USB devices available only for EFI applications and setup.
EHCI Hand-off
Disabled
Enabled
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change
should be claimed by the EHCI OS driver.
Device Reset Timeout
10 sec
20 sec
30 sec
40 sec
USB legacy mass storage device Start Unit command timeout.
USB Transfer Timeout
1 sec
5 sec
10 sec
20 sec
The timeout value for control, bulk, and interrupt transfers.
Device Power-Up Delay
Selection
Auto
Manual
Define maximum time a USB device might need before it properly reports itself to the host
controller. Auto selects a default value which is 100ms for a root port or derived from the hub
descriptor for a hub port.
Device Power-Up Delay Value
0-40
Default :
5
Actual power-up delay value in seconds.