Congatec conga-SBM2C Скачать руководство пользователя страница 6

Safety Warning

Warning

When   the  conga-SBM²C  is   used   in   conjunction   with   the  SBM²C  Smart   Battery 
Management Module starter kit, its use is intended for 

ENGINEERING DEVELOPMENT 

OR EVALUATION PURPOSE ONLY 

and is not considered by congatec AG to be fit for 

commercial use. As such, the goods provided in the SBM²C Smart Battery Management 
Module starter kit may not be complete in terms of required design-related protective 
considerations,   including  product  safety  measures   typically  found  in  the end  product 
incorporating the goods. As a prototype, this starter kit does not fall within the scope of 
the European Union directive on electromagnetic compatibility and therefore may not 
meet the technical requirements of the directive.

Persons   handling   the   product   must   have   electronics   training   and   observe   good 
laboratory practice standards.

The SBM²C Smart Battery Management Module starter kit has not been tested 
to meet the FCC Rules and/or UL certification and/or CE compliance.

Do not leave the  conga-SBM²C  Smart Battery Management Module starter kit 
unattended. The battery may reach critical conditions during operation.

Fire, explosion and severe burn hazard could happen if abused.

Do not crush, disassemble or short circuit the battery.

If the actual conga-SBM²C module is to be implemented in a carrier board design and 
that carrier board design is used in a complete  system for series production, then the 
system   designer/manufacturer   must   ensure   that   the   system   meets   all   safety, 
certification, compatibility and/or any other regulations/requirements set for forth by the 
governing   bodies   of   the   jurisdiction   wherein   said  system   will  be   made   available  for 
purchase and/or use.

Electrostatic Sensitive Device 

All   congatec   AG   products   are   electrostatic   sensitive   devices   and   are   packaged 
accordingly.   Do   not   open   or   handle   a   congatec   AG   product   except   at   an 
electrostatic-free workstation. Additionally, do not ship or store congatec AG products 
near   strong   electrostatic,   electromagnetic,   magnetic,   or   radioactive   fields   unless   the 
device is contained within its original manufacturer's packaging. Be aware that failure to 
comply with these guidelines will void the congatec AG Limited Warranty. 

Lead-Free Designs (RoHS)

All congatec AG designs are created from lead-free components and are completely 
RoHS compliant.

Copyright © 2008 congatec AG 

SBM2Cm11

6/24

Содержание conga-SBM2C

























Отзывы: